NICEIC Approved Contractor · Middleton, Manchester24/7 emergency call-outs07802 785499

07802 785499

AboutServices

- Domestic Electrical Work
- Commercial Electrical Services
- EICRs
- Consumer Unit Upgrades
- 24/7 Emergency Electrician
- Full &amp; Partial Rewires
- Fault Finding &amp; Repairs
- EV Charger Installation
- Lighting Installation
- Sockets, Circuits &amp; Spurs
- Smoke, Heat &amp; CO Alarms
- PAT TestingAll electrical services →

Areas

- Middleton
- Manchester
- Rochdale
- Tameside
- Oldham
- Stockport
- Bury
- Heywood
- Chadderton
- Prestwich
- Failsworth
- Royton
- Whitefield
- Blackley
- Radcliffe
- Shaw
- Ashton-under-LyneAll areas we cover →

Our WorkReviewsContactGet a free quote

Home / Services / Rewires
# House rewiresin Middleton,fully certified
Replace uncertain wiring with a planned installation that suits how you use the building. Agree the circuits, disruption and making-good responsibilities before work begins.

Get a free quote07802 785499

NICEIC Approved

Approved Contractor

12-month guarantee

On all workmanship

Fully insured

£5m public liability

24/7 call-outs

Day or night

Free quotes

Free site visits

Overview

## Rewires: a clearer next step
A rewire replaces all or a defined part of the fixed electrical installation. It can involve cables, sockets, lighting points, switches, protective devices and the connections that allow protective measures to operate. The right scope depends on the condition of the existing installation, planned changes and the demands placed on each circuit, rather than the age of a property alone.

Connect Electrical North West LTD, run by electrician Matthew Tommins in Middleton, provides electrical work across Greater Manchester and Cheshire. A free site visit and quote give you an opportunity to discuss access, room layouts and the outcome you need. A useful rewire proposal makes clear what is being replaced, what is retained and how the completed installation will be tested.

Rewiring is worth considering during major refurbishment, where wiring has deteriorated, or when alterations have left an installation difficult to adapt safely. An inspection may show that targeted work is sufficient instead. A new consumer unit alone does not replace the wiring behind walls, and old-looking accessories do not by themselves establish that every circuit needs replacement.

The practical value of planning is fewer avoidable decisions once floors are lifted and walls are open. Think about furniture positions, kitchen appliances, home working and likely future loads. Professional design brings those requirements together with cable routes, protective measures and testing, so socket numbers and circuit arrangements are not decided only by what is easiest to install.

The risk of waiting

## Problems worth addressing early
A useful decision starts with understanding the risk and the practical constraints. These are the issues to discuss before choosing the scope of work.

### Assuming age proves condition
Installation age can prompt investigation, but it is not a complete diagnosis. Cable type, test results, alterations and environmental damage all matter. Start with evidence about the existing wiring rather than accepting that a particular birthday automatically means the whole property must be rewired.

### Missing requirements from the quote
Unlisted outside supplies, loft lighting or cooker connections can create misunderstandings. Walk through each room and discuss fixed equipment. Confirm whether the proposal includes accessories, consumer unit work, testing, waste removal and any making good instead of assuming these are all included.

### Decorating before electrical work
Chasing walls and lifting floor coverings can disturb finished surfaces. Coordinate electrical work with plastering, kitchen fitting and decoration wherever possible. If the property is occupied, agree how rooms will be accessed and which areas need clearing before the first installation stage.

### Adding loads without a design
Electric heating, cooking equipment and charging can alter demand significantly. Spare spaces in a consumer unit do not prove that any additional load is suitable. The design needs to consider supply capacity, protective devices and cable routes together, not simply the number of available switches.

### Leaving certification unclear
A rewire needs inspection, testing and the appropriate electrical certification. Relevant domestic work may also require Building Regulations notification. Ask how certification and any applicable notification will be handled, and keep the resulting documents for future maintenance, alterations or a property sale.

Our process

## Five steps, no guesswork.

- 01

### Survey the property
Discuss the present installation, planned building work and how the rooms are used. Access, occupancy and finishes affect the practical approach. The site visit helps identify areas requiring further investigation before a reliable scope and quote can be agreed.

- 02

### Agree the layout and scope
Set out socket positions, lighting controls, fixed appliance connections and any future provisions. Identify retained circuits and exclusions. Agree who is responsible for moving furniture, lifting specialist flooring, plaster repairs and decoration so the electrical proposal fits the wider refurbishment plan.

- 03

### Install the first-fix wiring
Cable routes and equipment positions are prepared with suitable protection and support. Work is coordinated with the building sequence. In an occupied property, any temporary arrangements must be planned safely; it should not be assumed that every room will retain normal power throughout.

- 04

### Fit accessories and protection
Sockets, switches, lighting connections and the consumer unit arrangements are completed to the agreed specification. The electrician checks that equipment suits the circuit design and environment. Changes requested at this stage may affect materials, access and the sequence of remaining work.

- 05

### Test and hand over
The installation is inspected and tested, with appropriate certification and any applicable notification addressed. You are shown the circuit identification and relevant controls. Keep the documents and ask about future additions before making changes that could undermine the original circuit design.

What you get

## The outcome, not just the job.

### A more direct route forward
Agree the symptoms, priorities and access arrangements at the outset. A clear brief helps focus the work and reduces avoidable back-and-forth, without promising an arrival time or completion date that the property has not yet been assessed to support.

### Safety built into the decision
Professional assessment considers the installation and its protective measures, not just the visible accessory. The business is a NICEIC Approved Contractor, and the agreed work should reflect the relevant requirements of BS 7671 and applicable Building Regulations.

### Decisions that support lasting use
Suitable materials, appropriate protection and attention to the surrounding installation matter beyond the day of the work. Discuss environmental conditions and future plans early, so a short-term choice does not overlook an issue that is already likely to need attention.

### Control over the agreed spend
Free quotes and site visits help establish what you are authorising. Ask what is included, what is excluded and how any additional work will be agreed. An understandable scope is more useful than a headline figure with important assumptions left unstated.

### Know what you can rely on
Relevant testing and an explanation of findings help distinguish completed work from anything still needing attention. Keep documentation and follow any operating restrictions. Clear information is particularly important where existing equipment or wiring falls outside the agreed work.

### Accountability after the visit
A 12-month workmanship guarantee gives you a clear reason to get in touch about workmanship concerns. The business carries £5m public liability, £10m employers’ liability and £5m professional indemnity insurance. Insurance and the guarantee serve different purposes; neither replaces a properly agreed scope.

In detail

## The details behind the work
Materials, methods and the way a building is used all influence the right solution. Discuss these practical details during assessment rather than relying on a standard package that may not fit the installation.

### Cable, accessories and protective measures
Cable selection depends on load, installation method, grouping, temperature and the protection required. The route matters as much as the cable size: insulation and concealed spaces can affect current-carrying capacity. Accessories should be suitable for their position, including exposure to moisture or impact where relevant.

RCD protection, earthing and bonding form part of the design assessment under BS 7671. Protective devices must suit the installation and consumer unit. It is not enough to specify an attractive range of sockets while leaving the protective arrangements or the suitability of retained wiring unresolved.

### Full and partial rewires
A full rewire and a partial rewire are different scopes, not interchangeable descriptions. Partial replacement may be appropriate where sound circuits can be retained and safely integrated. Testing is important because the condition of a circuit cannot be established solely by inspecting its visible switches and sockets.

If some wiring remains, the proposal should identify it and explain relevant limitations. Future access also matters: retaining a circuit beneath newly finished floors may be a poor practical choice if it is already likely to need attention. Compare the evidence, disruption and long-term plan before deciding.

### Occupied homes and refurbishment projects
A vacant renovation usually allows a different sequence from work around a household. Clear access to walls, floors and the consumer unit reduces avoidable interruption. Discuss pets, children, home working and any equipment that needs dependable power before agreeing how the installation stages will be organised.

Chasing and lifting can create dust and disturb finishes. Electrical work and decorative making good are separate tasks unless expressly included together. Confirm the handover condition of walls and floors, and coordinate plaster drying, kitchen installation and final decoration with the wider project rather than relying on assumptions.

### Residential layouts and commercial demands
In a home, consider bedside sockets, kitchen worktops, hall lighting and outdoor equipment as part of everyday usability. Dedicated supplies may be needed for particular appliances. Planning around actual furniture and appliance positions can reduce dependence on extension leads without installing points in places you cannot reach.

Commercial premises may need circuit separation, out-of-hours coordination, equipment isolation and access arrangements agreed with the responsible person. Offices, workshops and customer areas have different demands. A change in use should be discussed early because the wiring design must reflect the equipment and environment, not just the floor area.

Free site visit &amp; fixed price

NICEIC Approved. 12-month workmanship guarantee.

Get a free quote

Related services

- Consumer unit upgrades →
- Sockets and circuits →
- EICR →

Areas covered

Electrician Middleton · Electrician Manchester · Electrician Rochdale · Electrician Tameside · Electrician Oldham · Electrician Stockport · Electrician Bury · Electrician Heywood · Electrician Chadderton · Electrician Prestwich · Electrician Failsworth · Electrician Royton · Electrician Whitefield · Electrician Blackley · Electrician Radcliffe · Electrician Shaw · Electrician Ashton-under-Lyne

All service areas

FAQs

## Rewires: your questions answered

### How much does a rewire cost?
+A quote depends on property size, the number of points, access, installation condition and the agreed specification. There is no fixed rewire price here. Free quotes and site visits are available. Compare what is included, particularly consumer unit work, making good, accessories, certification and any retained circuits.

### How long does rewiring typically take?
+A whole-property rewire typically takes several days or longer, depending on size, access, occupancy and building work. A staged refurbishment may run across a longer programme. The site visit is the time to agree a realistic sequence and explain when power interruptions, first fix and final fittings are expected.

### What is the process before work starts?
+The property is assessed, your requirements are discussed and a scope is agreed. Room layouts and equipment positions help shape the design. Confirm the specification and responsibilities before installation starts, including access, furniture, floor coverings and whether plaster repairs or decoration are included in the proposed work.

### What guarantee covers the workmanship?
+The workmanship guarantee is 12 months. Issues after 12 months caused by workmanship are normally fixed at no extra cost. Tell us what has happened and which work is affected so it can be assessed. Later alterations, equipment failures and unrelated existing faults need to be distinguished from workmanship issues.

### How long does new wiring last?
+There is no single lifespan that applies to every installation. Cable condition depends on loading, temperature, environment, damage and later alterations. Inspection and testing help assess continued suitability. Accessories and connected equipment may need attention before concealed cable, so a rewire is not a promise of maintenance-free electricity indefinitely.

### Can you help if the old wiring becomes unsafe overnight?
+Yes, 24/7 emergency call-outs are available. An emergency visit may make an affected circuit safe rather than complete a planned rewire. Stop using damaged equipment and describe any heat, burning smells or shocks. If there is fire or immediate danger to life, leave and call 999.

### Do you quote for rewires in Middleton, Stockport and Cheshire?
+Yes. Coverage includes Middleton, Manchester, Stockport and Cheshire, alongside the other listed Greater Manchester locations. Give the address, property type and refurbishment plans when enquiring. A local site visit helps establish access and scope; properties in the same town can still need very different electrical work.

### Do I need to move out, and will I receive certificates?
+Moving out is not automatically necessary, but occupancy affects access, disruption and temporary power arrangements. Discuss what is practical for your property. Completed rewiring should receive appropriate electrical certification, with applicable Building Regulations notification addressed. Ask for the agreed arrangements and retain the documents after handover.

## Plan your rewire clearly
Arrange a free quote and site visit. Bring your room plans and priorities, and agree a rewire scope that explains the installation, disruption and handover before you commit. Coverage includes Middleton, Manchester, Rochdale, Tameside, Oldham, Stockport, Cheshire, Bury, Heywood, Chadderton, Prestwich, Failsworth, Royton, Whitefield, Blackley, Radcliffe, Shaw and Ashton-under-Lyne.

NICEIC Approved · £5m public liability · 12-month workmanship guarantee · Read our reviews

Get my free quote07802 785499

Connect Electrical North West LTD

590 Manchester Old RoadMiddleton, ManchesterM24 4PW

07802 785499matt@connectelectricalnw.co.uk

Areas covered

- Middleton
- Manchester
- Rochdale
- Tameside
- Oldham
- Stockport
- Bury
- Heywood
- Chadderton
- Prestwich
- Failsworth
- Royton
- Whitefield
- Blackley
- Radcliffe
- Shaw
- Ashton-under-Lyne

Company

- Services
- About
- Our Work
- Reviews
- Privacy Policy
- Terms &amp; Conditions
- Cookie Policy
- Contact
- Instagram @Connectelecnw

© 2026 Connect Electrical North West LTD. NICEIC Approved Contractor.

Call nowFree quote