NICEIC Approved Contractor · Middleton, Manchester24/7 emergency call-outs07802 785499

07802 785499

AboutServices

- Domestic Electrical Work
- Commercial Electrical Services
- EICRs
- Consumer Unit Upgrades
- 24/7 Emergency Electrician
- Full &amp; Partial Rewires
- Fault Finding &amp; Repairs
- EV Charger Installation
- Lighting Installation
- Sockets, Circuits &amp; Spurs
- Smoke, Heat &amp; CO Alarms
- PAT TestingAll electrical services →

Areas

- Middleton
- Manchester
- Rochdale
- Tameside
- Oldham
- Stockport
- Bury
- Heywood
- Chadderton
- Prestwich
- Failsworth
- Royton
- Whitefield
- Blackley
- Radcliffe
- Shaw
- Ashton-under-LyneAll areas we cover →

Our WorkReviewsContactGet a free quote

Home / Services / Consumer unit upgrades
# Consumer unit upgradesin Middletonfrom £600 + VAT
Replace an unsuitable or ageing consumer unit with protection designed around your installation. Upgrades start from £600 + VAT, with existing circuits assessed rather than hidden problems overlooked.

From £600 + VAT

Get a free quote07802 785499

NICEIC Approved

Approved Contractor

12-month guarantee

On all workmanship

Fully insured

£5m public liability

24/7 call-outs

Day or night

Free quotes

Free site visits

Overview

## A better board starts with the whole installation
A consumer unit distributes electricity to the circuits in your property and houses devices that provide protection against electrical faults. Replacing it can improve the protective arrangements, but choosing a new enclosure is only part of the job. The circuits connected to it and the earthing arrangements also need attention before a safe changeover can be planned.

Connect Electrical North West LTD, run by electrician Matthew Tommins in Middleton, offers consumer unit upgrades across Greater Manchester and Cheshire. The business is a NICEIC Approved Contractor. Free quotes and site visits help establish the existing arrangement, the intended changes and any concerns that need investigation before a replacement is agreed.

You might be considering an upgrade because you have an older fuse box, are planning new circuits or have been advised that existing protection needs improvement. None of those situations should be assessed on appearance alone. A modern-looking board does not prove the wiring is satisfactory, and an older board needs proper assessment rather than automatic assumptions.

The useful outcome is a coordinated installation: suitable protective devices, correctly identified circuits and appropriate inspection, testing and certification. A new consumer unit cannot repair every defect elsewhere in a property. Identifying that distinction early helps you understand the quote and avoids treating replacement as a blanket solution for unrelated electrical problems.

The risk of waiting

## Problems worth addressing before they grow
The most useful first step is to understand the cause, not choose a replacement at random. These situations deserve a closer look before more equipment is connected or an alteration is started.

### An old fuse box with limited protection
Older fuse arrangements may not provide the additional protection expected for many modern circuits. RCD protection can reduce risk from certain earth faults, but it does not remove every electrical hazard. Assess the installation and the intended use before deciding the appropriate protective arrangement.

### Tripping blamed on the new board
More sensitive or differently arranged protection can reveal existing circuit faults or leakage. Simply fitting a different device to prevent tripping can leave a genuine problem unresolved. Checks on existing circuits help identify likely issues and make the remedial scope clearer before the changeover.

### Unclear earthing and bonding
A new consumer unit relies on the installation around it, including suitable earthing and protective bonding where required. Missing or unsuitable arrangements need assessment, not just a note that the board itself is new. Supply-related concerns may also require involvement beyond the consumer unit replacement.

### Buying a board before the survey
Circuit count alone does not determine the right equipment. Device types, circuit characteristics, available space and manufacturer compatibility all matter. Choosing an attractive enclosure online before the installation is assessed can narrow the options for the wrong reasons and does not establish an appropriate electrical design.

### Expecting a replacement to be a rewire
A consumer unit upgrade changes the distribution and protection equipment, not all the cables and accessories throughout the property. Existing wiring may remain if suitable, while defects may require separate attention. Ask exactly which circuits, tests, remedial items and certification are included in the quotation.

Our process

## Five steps, no guesswork.

- 01

### Tell us what you need
Describe the property, the reason for your consumer unit upgrades enquiry and any immediate concerns. Share existing reports or photographs if available, without removing covers or exposing live parts. You do not need to identify the technical solution before asking for help.

- 02

### Arrange the assessment
A free site visit provides an opportunity to discuss the existing installation, access and practical constraints. Explain who occupies the property and whether any equipment needs special shutdown arrangements. This information helps establish a workable scope instead of relying on assumptions about the building.

- 03

### Review the quote and scope
Check what is included, what depends on further findings and which records you should receive. Ask about likely interruptions and any preparation needed. A clear scope makes it easier to compare the proposed work with your actual priorities and decide whether to proceed.

- 04

### Carry out the agreed work
The work follows the agreed scope, with safe access and isolation considered as required. If the condition of the installation raises an issue outside that scope, it needs explanation and a decision rather than an unexplained change to what you thought you had booked.

- 05

### Understand the findings and next steps
Review the relevant findings or documentation and ask what they mean for everyday use. Keep electrical records somewhere accessible for future work. Where further action is recommended, establish the reason and urgency so you can distinguish a safety concern from an optional improvement.

What you get

## The outcome, not just the job.

### Get to a useful decision sooner
Start with the symptoms, property details and intended outcome. A focused assessment reduces time spent guessing which product or service to request and helps identify the next sensible action without promising a fixed response or completion time.

### Make safety decisions on evidence
Relevant inspection and testing give a stronger basis for decisions than appearance alone. Understanding existing protection and circuit condition helps avoid changes that look convenient but leave the underlying risk unaddressed.

### Plan beyond the immediate job
Discuss foreseeable changes before the scope is finalised. Considering equipment use, access and future maintenance can help avoid work that needs revisiting unnecessarily, while recognising that no component or installation has an unlimited useful life.

### Keep the cost tied to the scope
Free quotes and site visits let you discuss the work before committing. Clear inclusions and separately explained findings help you understand what you are paying for rather than comparing headline prices that cover different things.

### Reduce avoidable disruption
Agree access and power arrangements early, especially in occupied properties. Planning cannot eliminate every unexpected finding, but it can prevent basic problems such as inaccessible boards or essential equipment being overlooked when isolation is needed.

### Know who is responsible
Connect Electrical North West LTD is a NICEIC Approved Contractor with £5m public liability, £10m employers’ liability and £5m professional indemnity insurance. A 12-month workmanship guarantee provides a clear point of reassurance about the work undertaken.

In detail

## What matters beneath the surface
Good decisions about consumer unit upgrades depend on the installation, not a one-size-fits-all package. These details explain the equipment, working methods and property differences worth discussing before you agree the scope.

### Enclosures, RCDs, RCBOs and surge protection
A consumer unit specification includes more than the outer enclosure. Devices need to be appropriate for the circuit and compatible with the assembly. An RCBO combines residual-current and overcurrent protection for an individual circuit; separating protection this way can help limit the effect of some faults compared with arrangements sharing one RCD across several circuits.

Surge protection helps limit transient overvoltages; it is not a substitute for all other protective measures. RCD types also differ, and selection should take account of the connected loads and current requirements. Ask for an explanation of the proposed arrangement in practical terms rather than assuming every board with the same number of ways provides equivalent protection.

### Checks before removal and safe changeover
The existing installation should be assessed before the board is changed. Relevant checks help establish circuit condition, earthing and bonding, and whether defects could affect reconnection to the new protection. Where further investigation is needed, understanding it early supports a clearer quote and avoids presenting an unexpected fault as an unavoidable extra without explanation.

Changing a consumer unit requires safe isolation and a planned interruption of power. Tell the electrician about essential equipment and shutdown procedures in advance. The supply arrangement may affect how isolation is achieved, so do not assume switching the existing main switch off makes every conductor inside the equipment safe to handle.

### Replacement options and future alterations
The design should reflect the existing circuits and any credible planned additions, such as a renovation or a new dedicated supply. Allowing sensible space for future circuits can be useful, but spare positions do not guarantee spare electrical supply capacity. Future loads still need assessment when their requirements are known.

A straightforward board replacement is different from replacing damaged circuit wiring or altering the supply arrangement. In England, replacement of a consumer unit in a dwelling is notifiable under Part P. The required Building Regulations process and electrical installation certification should be addressed as part of the agreed work, rather than left for the homeowner to discover afterwards.

### Homes, landlords and business distribution equipment
For an occupied home, practical preparation includes access to the board and agreement about the loss of power. Refrigeration, home working and other essential uses need discussion, but the work should not be sold as a guaranteed interruption-free upgrade. Testing after installation is an important part of the job, not an optional stage to omit for speed.

Landlords should retain the installation certificate and any Building Regulations documentation with the property records. A replacement consumer unit does not automatically provide a satisfactory EICR for the whole property. Commercial distribution equipment may involve different loading, supply characteristics and operational constraints; a domestic starting price should not be treated as a quote for every business premises.

Free site visit &amp; fixed price

NICEIC Approved. 12-month workmanship guarantee.

Get a free quote

Related services

- EICR →
- Rewires →
- Fault Finding →

Areas covered

Electrician Middleton · Electrician Manchester · Electrician Rochdale · Electrician Tameside · Electrician Oldham · Electrician Stockport · Electrician Bury · Electrician Heywood · Electrician Chadderton · Electrician Prestwich · Electrician Failsworth · Electrician Royton · Electrician Whitefield · Electrician Blackley · Electrician Radcliffe · Electrician Shaw · Electrician Ashton-under-Lyne

All service areas

FAQs

## Consumer unit upgrades: your questions answered

### How much does a consumer unit upgrade cost?
+Consumer unit upgrades start from £600 + VAT. The final quotation depends on the installation, protective arrangement and any work needed to make the change safely. Free quotes and site visits are available. Ask what equipment, testing and certification are included, and whether existing defects or supply-related work require a separate scope.

### How long does the work typically take?
+A straightforward domestic replacement is typically planned around a working day, but circuit faults, access and supply arrangements can change that. Power will need to be interrupted for the changeover and testing. Ask for an expected programme after assessment rather than relying on a guaranteed duration that ignores the condition of the existing installation.

### What happens when I first get in touch?
+Explain the property type, location and what you need to achieve. Connect Electrical offers free quotes and site visits. Existing reports, circuit information and a description of the symptoms can help establish the scope. You should understand the proposed work and relevant access requirements before deciding to proceed.

### What workmanship guarantee is included?
+There is a 12-month workmanship guarantee. Issues arising after 12 months that are caused by workmanship are normally fixed at no extra cost. Describe the issue so its cause can be assessed; the guarantee should not be confused with a promise that unrelated faults or every equipment failure are covered.

### How long will the installation or report remain useful?
+There is no fixed lifespan that makes every consumer unit due for replacement at the same age. Condition, suitability, damage and changing installation requirements all matter. Follow manufacturer guidance for user testing where applicable and arrange professional attention for heat, damage or unexplained tripping. New protection does not renew old wiring automatically.

### Is emergency electrical help available?
+Connect Electrical offers 24/7 emergency call-outs. Describe any burning smell, smoke, visible damage or loss of power when you call, without putting yourself at risk to investigate. Do not touch exposed wiring or use damaged equipment. If there is a fire or immediate danger, contact the emergency services.

### Do you upgrade consumer units in Middleton, Manchester and Cheshire?
+Connect Electrical is based in Middleton, Manchester, and covers Greater Manchester and Cheshire, including Middleton, Manchester, Rochdale, Tameside, Oldham, Stockport, Cheshire, Bury, Heywood, Chadderton, Prestwich, Failsworth, Royton, Whitefield, Blackley, Radcliffe, Shaw and Ashton-under-Lyne. Share the address and the nature of the work so access and the appropriate next step can be discussed.

### What should I prepare before a visit?
+Make the consumer unit or distribution board accessible without removing any covers. Gather previous electrical certificates or reports, note any symptoms and explain who needs to authorise access or power interruptions. Tell the electrician about essential equipment and occupants’ needs before the appointment; never dismantle electrical fittings to prepare.

## Get a clear plan before you commit
Tell Connect Electrical North West LTD what you need, where the property is and what is causing concern. Ask for a free quote and site visit for consumer unit upgrades in Greater Manchester or Cheshire. You can discuss the scope, practical arrangements and any findings that need attention before deciding how to proceed.

NICEIC Approved · £5m public liability · 12-month workmanship guarantee · Read our reviews

Get my free quote07802 785499

Connect Electrical North West LTD

590 Manchester Old RoadMiddleton, ManchesterM24 4PW

07802 785499matt@connectelectricalnw.co.uk

Areas covered

- Middleton
- Manchester
- Rochdale
- Tameside
- Oldham
- Stockport
- Bury
- Heywood
- Chadderton
- Prestwich
- Failsworth
- Royton
- Whitefield
- Blackley
- Radcliffe
- Shaw
- Ashton-under-Lyne

Company

- Services
- About
- Our Work
- Reviews
- Privacy Policy
- Terms &amp; Conditions
- Cookie Policy
- Contact
- Instagram @Connectelecnw

© 2026 Connect Electrical North West LTD. NICEIC Approved Contractor.

Call nowFree quote